Xbox360 JTAG Installation, Repairs in Westbury

If your looking to get a JTag installed in your Xbox360 or even a JTAG repaired but don't have the electrical or soldering skills to do it yourself, don't worry. I Need Technical Support have installed and repaired hundreds of Xbox360 JTag's, all of which are successful lobby hosts and homebrew clients. We will install both JTag Hack and all relevant software so that your Xbox360 JTAG is ready to go. Please remember that you can only JTAG an Xbox360 if the kernal is exploitable and dash is Pre 8955. If your Xbox360 console system has been updated past this version then you may be able to take advantage of our Reset Glitch Installation service.

If you are looking for JTAG motherboard repairs! Have a look at our Xbox360 Motherboard Repair service.

Repair Time - 24 hours
Difficulty - 9/10
Cost - £50

Here is the process we use for JTAGing your Xbox360 console:-

* Carefully we dismantle your Xbox360.
* We then remove your Xbox360 DVD drive and all removable components.
* The Xbox360 it's self is then cleaned of any dust build up.
* We then install the JTAG hack and our nand extractor.
* 2 raw copies of your nand are taken in bin format.
* Then we extract the cpu key from your Xbox360.
* The CPU key is then used to decrypt the nand bin file.
* Once decrypted we extract all relevant files needed.
* A custom nand bin file is then created and flashed to your Xbox360.
* Carefully we re-assemble your Xbox360 and run stability tests.
* All information and files are supplied on a DVD.

Contact us now, email help@ineedtechnicalsupport.co.uk or call 07730 190826.