PS3 Blu-Ray Drive Replacement in Liverpool

Swapping a PS3 Blu-Ray drive is not as simple as opening up the console and swapping the drive. For many consoles a unique serial key links the drive to the console's main board. This is the case for the PS3.

To swap the blu-ray drive you need the original key injected into the new drive. This is where I Need Technical Support can help. The PS3 requires a matching key for the Blu-Ray drive to play games. We can extract this key from your original blu-ray drive and inject it into your new one.

All PS3 Blu-Ray drives replaced.

Repair Time - 1 hour
Difficulty - 7/10
Cost - "Free Quotation"

Here is the process we use for replacing your PS3's Blu-Ray drive:-

* Carefully we dismantle your PS3.
* We then remove your PS3 blu-ray drive.
* The PS3 it's self is then cleaned of any dust build up.
* The blu-ray drive is then connected to our specialist equipment and tested for any problems.
* A raw copy of the firmware located on the blu-ray drive's pcb is then taken.
* We then extract your unique key from the extracted raw firmware file.
* This key is then injected into your new Firmware.
* The firmware is then flashed to your New blu-ray drive.
* The New blu-ray drive is then fully tested for any read errors.
* Carefully we re-assemble your PS3.

Contact us now, email help@ineedtechnicalsupport.co.uk or call 07730 190826.